Bumper- Rear

• 11-Gauge US Steel Construction
• Retain OEM Receiver Hitch And Wiring
• Pre-Cut Openings To Utilize Factory Sensors
• 100 Pct. Made In The USA

See All

• Stand Up To 408 Hour Salt Spray Testing /Excellent UV Protection
• Dual Light Ports To Mount Auxiliary Flood Or Spot Sights
• Lights Sold Separately
• Bumper Sensor Compatible
• Durable Black Textured Powder Coat Over 11 Gauge Steel
• Bumper Accommodates Oversize Tires
• Easy To Install Pre Drilled Bolt Holes And Cutouts

See All

• Integrates The Existing Receiver Hitch
• Back Up Lights
• Back Up Sensor Holes
• Retains Receiver Hitch And Wiring Locations
• Pipe And Formed Treadplate
• Gloss Black Powder Coat

See All

• Combination Pipe And Tread Plate Construction
• Gloss Black Powder Coat
• Back Up Lights Included
• Pre-Drilled Sensor Holes
• Retains OEM Receiver Hitch And Wiring Locations
• MADE IN THE USA

See All

• 10-Stage Variable Valving
• High Pressure Nitrogen Charged
• Protects Vehicle From On And Off-Road Debris
• D-rings Included - 4.75 Ton Capacity
• D-Ring Mounts Welded Inside And Out For Increased Strength
• Black Finish

See All

• Mount Kit Sold Separately
• Popular Diamond Tread Design
• Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
• Downsize and Compact Are 350/3500 lb. Weights
• V5 Tested Certified To SAE J684

See All

• Flat Black Powder Coat
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Bumper Meets Rear Flares To Create Convenient Step
• Available With Or Without A Tire Carrier
• Stand Up To 408 Hour Salt Spray Testing /Excellent UVU Protection
• Rear Parking Blind Spot Sensor Compatible
• Maintains Factory Receiver
• Provision To Relocate Backup Camera
• Made In The USA

See All

• Paintable
• Back Up Sensor Holes
• Retain OEM Receiver Hitch And Wiring Locations
• Pipe And Formed Smooth Plate Steel

See All

• Engineered And Built To Be More Durable And Easier To Use
• Made From 1/8 And 3/16 Inch Steel
• Corrosion Resistant Black Powder Coating
• Raised Corners For Increased Departure Angles
• Welded Eyelets For D Rings To Increase Recovery Options
• Will Work With Factory Receiver Hitch
• Can Accommodate Up To 40 Inch Spare Tire

See All

• Protects Vehicle From Damage Against Wildlife And Road Debris
• Provides Added Safety To Driver And Vehicle
• Heavy Duty Diamond Plate Steel
• Honeycomb Mesh Protects Grille/Gives Maximum Airflow
• 1.5 in. Headlight Protection Tubes
• 2 in. Full Wraparound Wings Ties Into Bumper
• Provisions For Factory Parking Sensors
• 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
• Compatible For Factory Fog Lamps Or LED Post Mount Lights
• Custom Die Cast Riveted Logo Badge
• Mounting Provisions For License Plate
• Hardware Mounting Brackets Included

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HS Shackle Mounts
• Two Flush Mount Led Lights Included
• License Plate Illumination Lights Included
• Laser-Cut HDX Logo On Ends
• Application Specific Designs
• Mounting Brackets Included
• Available With Or Without Provision For Back-Up Sensors
• Available In Textured Black Finish Or Raw

See All

• Integrated Steps On Either Side Of The Tailgate
• Durable Formed 3/16in. Steel Construction
• Retain OEM Receiver Hitch And Wiring Locations
• 3/4in. D-Ring Recovery Points
• 2 Stage Black Powder Coat

See All

• Easy To Install!
• Durable; Steel Construction
• Incl. [2] Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Incl. Backup Sensor Relocators

See All

• 10-Stage Variable Valving
• Durable Steel Construction
• Includes 2 Rough Country Led Cubes
• Integrated Steps For Easy Access To Bed
• Retains Factory Receiver Hitch
• Includes Backup Sensor Relocators

See All

• Mount Kit Included
• 2 In. Diameter Tube Frame
• Optional Class III/IV Hitch Available. Sold Separately
• Retractable License Plate Holder Conceals Receiver Hitch
• Equipped With Mount Points For Optional Auxiliary Lights
• Available For Vehicles With Or Without Backup Sensors
• Bolt-On Installation; No Drilling Required

See All

• Signature Series Step Pad
• Complete Assembly
• Molded Polymer Step Pads
• V5 certified
• Interchangeable Components
• 3 Year Warranty

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Integrates With Existing Receiver Hitch
• Formed Steel Durability
• Gains Lower Steps And Recovery Points
• Stylish And Functional

See All

• Increases Ground Clearance And Angle Of Approach
• Constructed Of 10 Gauge Steel For Strength And Style
• Compatible For Blind Spot Monitors And Parking Sensors
• Accommodate For Oem Hitch And Led Back Up Lights
• Configured To Accept 2 Fm6 Led Flush Mount
• Custom Laser-Cut Westin Logo
• Hardware And Mounting Brackets Included
• Bolt-On Installation - No Drilling Required

See All

• Mounting Brackets Will Vary With Make/Model

See All

• Brushed Aluminum Skid Plate Included- Works with Factory Hitch
• Fully Welded 1-piece construction- 1.75 in. .095 Wall Tubing
• Pre-Runner Style
• 5 year Finish Warranty- Lifetime Workmanship Warranty

See All

• Aggressive Styling
• Integrated Tow Hooks And D-Ring Mounts
• Double Rung Side Step
• Fab Fours Signature Knife Edge Design
• Ease Of Installation
• Includes 16 Gauge Removable Skin
• Sensor Compatible
• 2 Integrated Pod Mounts For Reverse Lights
• Stainless Steel Hardware
• 2 Stage Matte Black Powder Coat
• 11 Gauge Steel Construction
• MADE IN THE USA

See All

• Easy Bolt-on Installation.
• Aggressive Appearance.
• Incl. [2] Rough Country Led Cubes
• Incl. D-rings
• Retains Factory Receiver Hitch

See All

• 7 Gauge Steel
• 1-Piece Fully Welded Construction
• 1 in. Thick HD Shackle Mounts
• Two Flush Mount Led Lights Included
• Welded Hitch Receiver
• Laser-Cut Snyper Logo On Ends
• Mounting Brackets Mount Directly To Frame
• Textured Black Finish

See All

• Aggressive Design
• Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
• Perfectly Follows The Body Lines
• Side Mounting Slots And Tabs For Various Light Options
• Provides Far More Tire Clearance
• Integrated Shackle Mounts

See All

• With Receiver
• No D-Ring Mounts

See All

• Tough And Durable
• Ends Are Tapered For Increased Departure Angles
• Integrated 2 in. Receiver

See All

• Manufactured From Durable 5/32 Steel And 2x.120 Tubing
• Protects Vehicle From On And Off-Road Debris
• Incl. D-Ring Set
• Satin Black Finish
• Installation Hardware Included

See All

• Standard Rear Bumper

See All

• Cold Rolled Brite Steel
• OE Style Steel Step Plate
• Molded Polymer Surface
• Mount Kit Sold Separately
• 3 Year Warranty

See All

• Safely Holds Up To 37 In. Tires
• Innovative Swing-Out System
• Includes 3rd Brake Light Relocation Bracket
• Includes License Plate Relocation Bracket
• Durable Steel Construction

See All

• Functional Design
• Works With 2 in. Receiver Tow Hitch
• Contoured Corners
• Allows Clearance For Spare Tire
• Black Powdercoat Finish
• 3 Year Warranty

See All

• Superior Strength And Styling
• Give Your Vehicle That Extra Cool Factor
• Two Front Side Openings Allow Light Options
• Sensor Compatible
• 11 Gauge US Steel

See All

• RotoPax Mount

See All

• 3/16-Inch Plate Steel Construction
• Designed To Work With Factory Or Westin Hitches
• Integrated Recovery Shackle Mount Points
• Auxiliary Light Mount Points
• Rock Light Mount Points
• 2 Off-Road Jack Points
• No Drilling Required - Bolt On Installation
• Includes Bumper; Mounting Hardware And Install Instructions

See All